Distiller C-Can, Length - 40ft 3in., Width - 8ft 7in., Height - 9ft 3in., Burner C-Can, Length - 40ft 3in., Width - 8ft 7in., Height - 9ft 3in., Distillation tower height - 25ft, Marley Aquatower Model 492 Cooling Tower - SPX Cooling Technologies, ARO double diaphragm pumps - Ingersoll Rand, Feed pump, Product pump, Waste pump, Flojet pumps - Xylem, Dilutive water pump, Level controllers - Kimray, Level control valves - Kimray, Glycol circulating pumps - MP Pumps, 5 HP HTO 120, 7.5 HP HTO 180, Oil circulating pump - MP Pumps, 7.5 HP HTO 180, Vacuum pump LEM series - SIHI, 4 pass heat exchangers, Shell and tube, 2 heat exchangers in series, Length - 10ft, Diameter - 12.8125in., Condenser - American Industrial Heat Transfer, 2 pass shell and tube, Length - 7ft, Diameter - 8in. , Heat exchanger - American Industrial Heat Transfer, 2 pass shell and tube, Cool glycol finished product with cooling tower water, Length - 3ft , Diameter - 6.25in., PLC, Dir

Skid width - 8ft3in., Base to the top of distillation tower - 25ft, Base to the top of evaporator - 13ft9.5in., Marley Aquatower Model 492G Cooling Tower - SPX Cooling Technologies, ARO double diaphragm feed, product and waste pumps - Ingersoll Rand, Flojet pumps for: Tower Reflux/Dilutive Water/Seal Water - Xylem, Level controllers - Kimray, Level control valves - Kimray, Temperature controllers - Kimray, Glycol circulating pump 5 HP HTO 120 - MP Pumps, Oil circulating pump 5 HP HTO 120 - MP Pumps, Vacuum pump Model TRMB 25-30 - Travaini, 4 pass heat exchanger shell and tube - Perry - Length - 12ft GRU-2000-V2.5in. - O.D. - 10.75in. - Tubes (72) - 3/4in. O.D. x 18 GA. x 10ft LG., Condenser - Perry - Length - 10ft2in. - O.D. - 8.625in. - Tubes (55) - 3/4in. O.D. x 18 GA. x 8ft LG., Pneumatic control valves in panel with Isonic 4000 series manifold - Mead Fluid Dynamics, Temperature and Process Controller - Omega, Natural gas burner - Maxon - Series 67 Tube-O-Flame - 8

Efco forms. Flat (parapet) Sections - Qty of 20. Curved sections (Barrier) - Qty 10. Top Form Extensions - Qty 10. Associated Hardware and Accessories Included. all form are 10 Ft long.

Liquid Seperator, Heat Exchanger, Service Liquid Valve, Temperature Regulating Valve

230 V, 3 Phase, 60 Hz

w/ Hotsy Model 1260SS, 3000PSI

2.1 kW 3 Phase Motor

Centrifugal Evac Pump:
2021
50/60 HZ
380/440 V

Motor:
50/60 HZ
240 Volts
850 RPM
36.5 AMPS
10 HP

Baldor 1 hp 3 Phase Motor, extensions

Each Durst drive w/ (1) Rexroth model: R902108017/02 AA11VL0260LRDDH211L hyd pump (60 GPM) Each w/ (1) Rexroth model: AA11VL0130DRG/10L NSD62N00-ES hyd pump (60 GPM) - Each w/ (1) Rexroth model: RG02120203/06 type AA11VL0260LRDH2/11L-NSD62K01 (60 GPM) - HPU 5000 PSI WP each drive 180+ GPM per drive - Complete w/ all low pressure suction piping; w/ Parker high pressure; (7) high pressure filter system (4 per drive) - HPU is all installed in 20 FT. container w/ dual side doors; end doors; w/ forklift slots - Unit is insulated - Container has certified shipping plate - HPU was originally powered by (2) Detroit 14LTR series 60 engines; has dual drive line guards - (2) hydraulic cylinders: 12" rod x 46 FT. OAL 10" rod x 46 FT. OAL; both 5K PSI WP

To Fit RITCHFIELD EQUIPMENT 1.8 cube tank mud vacumm, 25 hp 3 Phase Motor, Fruitland vacuum Compressor, explosion proof, float shut off, 480 volt 3 phase

2) 7/8 In to 5-1/2 In buggy heads,( 2)10 In and (1)12 In coil, 10 spare cables, all spare parts

1 piece 21 ft, 1 piece 12.5 ft, Total 33 ft 6 in

2 pieces 21 ft 2 in long, Total length 42 ft 4 in w/ Coating Certs

1 Piece 42 ft 4 in and 1 Piece 37 ft 10 in Total 80 ft 2 in

125 PSI, Hoses

3 Phase Motor

To Fit Hommak M-HM30 Homogenizer, 3 Phase Motor, Canner, Homogenizer, Refrigerated Tank w/ Agitator, Food Processing Grinder, Steam Boiler, Chiller, Steam Recovery Tower, Blender, Yogurt Filling Machine, Sullair Air Compressor

To Fit HOT ROD 18-11, 2x HotRot reactor units with control panels. Shredding system with loading hopper, 2x 10hp drive motors, and loading auger, 5 m3 infeed hopper with incline and cross-feed augers and monitoring platform, Horizontal and incline output augers with screener chute attachment. 1/2" minus screening trommel with 1yd3 wheeled cart for catching and unloading screened materials (custom Wilmar Wrangler quick attachment - could be modified for skid steer quick attachment plate). 2x 500 cfm biofilters including exhaust fans and monitors

Hepa 2.0

Qty 8 - 2" Poly Discharge Hoses
Qty 2 - 1" Conduit Roll
Qty 1 - 4" Corrugated Drain Line Coil

Qty 6 - 16" Pipe 30' Long
Qty 4 - 16" Pipe 11'-9" Long
Qty 2 - 4" Pipe 30' Long
Qty 1 - 16" Sleeve
Qty 1 - Pallet of Pipe & Fittings

Qty 700 - 3" x 6' Orange
Qty 100 - 4" x 4'-6" Yellow

Qty 3 - Pressure Gauges
Qty 1 - EMS II Marker Locator
Qty 1 - Welker Adjustable Probe AP-3MI&AIP-3MI

Arch clamp with hydraulically driven spacing by cylinders. - Automatic locking clamp with its own weight lifted by a lifting device via 4-strand chain slings for handling. - External indicators for validation of the different phases. - Supply voltage: 24 VDC - Hydraulic pressure: 150 bar - Handling: 1 to 4 segments, CE Marked

Arch clamp with hydraulically driven spacing by cylinders. - Automatic locking clamp with its own weight lifted by a lifting device via 4-strand chain slings for handling. - External indicators for validation of the different phases. - Supply voltage: 24 VDC - Handling: 1 to 2 segments, CE Marked

Hydraulically driven spreader clamp with hydraulic cylinders. - Self-locking clamp with its own weight lifted by a lifting device via - 4-strand chain slings for handling. - External indicators for validation of the different phases. - Mechanical locking system. - Equipped with a 3200kg hook in the center - Handling: 1 to 3 segments, CE Marked