Précédent Suivant
DÉTAILS RELATIFS À L'ARTICLE
Relevé du compteur
3 625 Heures
Nº  de série
103.75" wide angle blade, shoe width 22", CAT 3304 eng, 3spd powershift trans, OROPS

Rapport d'inspection



En tant qu'acheteur, veuillez noter que vous êtes responsable de l'examen de la totalité du rapport d'inspection lors de l'évaluation d'un article.
Résumé Inclut la certification de l'état de l'équipement de l'assurance IronClad® Inclut la certification de l'état de l'équipement de l'assurance IronClad®®
This tractor is in good overall condition. The sheet metal is straight and the paint good. Mechanically the machine appears to be sound and solid but could use minor repairs. See the report for further details.


Apparence générale
Description Évaluation Détails  
operators manual Yes
cab/operator station Mirror is broken off. Seat has small rip. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
sheet metal (fiberglass) condition Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
paint Has some fading.
(2)


Engine
Description Évaluation Détails  
hour meter 3625
make & model Cat 3304
serial # 09Z14689
emission control label No
fuel type Diesel
starter
battery
turbocharger
exhaust system Exhaust manifold gasket leaking. One nut is missing from a stud. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
cylinder head gasket Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
oil dipstick tube & bonnet
blowby (checked at idle) Minor
valve cover gasket
oil pan & gasket
injector pump Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
fuel line & injector leaks
water pump
radiator
limited function check Engine operates normally, is smooth and has power, no unusual noises present. Fan belts are loose.
(3)


Powertrain
Description Évaluation Détails  
transmission type Powershift - 3 forward and 3 reverse speeds. Serial # 3CX03105
torque converter
steering clutches
steering brakes
drive/propel motors NA
final drives
limited function check Operates properly shifted well, no unusual noises.


Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Description Évaluation Détails  
push arm/C-frame condition
push arm/C-frame rear pivot points Excessive wear present.
tilt/angle linkage pins & bushings Minor wear Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
blade trunnions or bushings Minor to moderate wear present. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
blade lift linkage pins & bushings Minor play
equalizer bar Minor play present.
pivot shafts Leakage on right roller frame. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
roller frame
belly pans Minor dents.
limited function check Operates properly with wear present in pivot locations.
(3)


Hydraulics
Description Évaluation Détails  
pumps No unusual noises.
valves
hoses Angle cylinder hoses are chafed. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
cylinders
cylinder pins and bushings Minor wear present.
limited function check Operates normally no unusual noise present.
(1)


Undercarriage
Undercarriage wear percentages are estimated averages only. These percentages are based on the average measurements of the undercarriage components and may vary due to the machine application, brand of parts, or OEM specifications available.
Description Évaluation Détails  
track tensioners
shoe width 22"
overall width of tracks (outside to outside of track shoes) 92 1/8"
grouser height 5% worn
pins and bushings rotated No
track link height 5% worn
pins & bushing wear (internal) Lubricated track wear percentage unavailable.
pins & bushing wear (external) 5% worn
carrier rollers 4% worn
track rollers 6% worn
front idler height 5% worn Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
rear idler height 5% worn Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
sprockets Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
limited function check Operational with minimal wear present.
(3)


Operator Station
Description Évaluation Détails  
steps/ladders The step on the rear hitch is bent Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
hand rails
mirrors Broken, in side box.
glass NA
seats/armrests Seat has rip in it. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
seat belts
horn
exterior lights NA
engine warning lights/alarms Oil pressure warning inoperable.
back up alarm
oil pressure .Warning light was inoperable, the engine ran fine. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
gauges Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
hour meter operational Yes
air conditioner NA
heater NA
hydraulic controls Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
steering controls Left turn lever sticks, stiff lever motion.
powertrain controls Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
control lock lever
roll over certification label No
limited function check Operation normal left control lever stiff.
(6)


Specialty Equipment
Description Évaluation Détails  
blade condition Blade width 103 3/4". Top edge bent. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
cutting edge condition Cutting edge can be turned. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
(2)
 
Réclamations :
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.