Précédent Suivant
DÉTAILS RELATIFS À L'ARTICLE
Relevé du compteur
1 510 Heures
Nº  de série
114.25" PAT blade, 20" shoe width, Case 6T830 eng, powershift trans, canopy w/sweeps, ripper

Rapport d'inspection



En tant qu'acheteur, veuillez noter que vous êtes responsable de l'examen de la totalité du rapport d'inspection lors de l'évaluation d'un article.
Résumé Inclut la certification de l'état de l'équipement de l'assurance IronClad® Inclut la certification de l'état de l'équipement de l'assurance IronClad®®
This machine appears to be in fair overall condition. The engine and powertrain seem to be performing properly with leaks. The hydraulic cylinders have leaks and the undercarriage is showing wear. The sheet metal is straight and the finish is fair.


Apparence générale
Description Évaluation Détails  
sheet metal (fiberglass) condition There are minor dents and dings throughout the metal work with rust in the paint loss areas. There is damage to the left rear ROPS post. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
paint The paint and decals are scratched and faded. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
(2)


Operator Station
Description Évaluation Détails  
steps/ladders
hand rails Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
mirrors Missing
seats/armrests The seat cushions have cracks and the left armrest is worn and torn. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
seat belts
horn
control lock lever
hydraulic controls Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
steering controls
powertrain controls Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
oil pressure Gauge reads in the middle of the green range.
exterior lights operational Yes
back up alarm operational Yes
gauges operational Yes Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
hour meter operational Yes
limited function check The components that were checked performed properly except as noted.
(5)


Engine
Description Évaluation Détails  
hour meter 1510 Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
make & model Case 6T830 Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
serial # Data not visible
emission control label Exempt
blowby (checked at idle) Minor
starter
battery
turbocharger Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
exhaust system Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
injector pump
radiator
cylinder head gasket leaks None Seen
valve cover gasket leaks Yes - There is oil washing down the right side of the engine from a valve cover leak.
oil pan & gasket leaks None Seen
fuel line & injector leaks None Seen
water pump
limited function check The engine started easily and ran well with minor smoke that cleared.
(4)


Powertrain
Description Évaluation Détails  
transmission type Powershift
torque converter
steering clutches
steering brakes
service brake
final drives There is leakage from the right final drive case. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
limited function check The powertrain functioned well when checked without a load. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
(2)


Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Description Évaluation Détails  
push arm/C-frame condition Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
pivot shafts
roller frame Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
belly pans The pans have oil and dirt accumulation. The exact source is undetermined but it could be from the valve cover leakage. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
push arm/C-frame rear pivot points Minor wear Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
tilt/angle linkage pins & bushings Minor wear Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
blade trunnions or bushings Minor wear Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
blade lift linkage pins & bushings Minor wear Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
equalizer bar Minor wear
limited function check The main components functioned properly with wear as noted.
(7)


Hydraulics
Description Évaluation Détails  
pumps
valves
hoses Some of the hoses show weathering and chafing. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
cylinders The right ripper cylinder is leaking and the ram is damaged. The right and left tilt cylinders are leaking. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
cylinder pins and bushings Minor wear Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
limited function check The system performed properly with wear and leaks as noted. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
(4)


Undercarriage
Undercarriage wear percentages are estimated averages only. These percentages are based on the average measurements of the undercarriage components and may vary due to the machine application, brand of parts, or OEM specifications available.
Description Évaluation Détails  
overall width of tracks (outside to outside of track shoes) 82 5/8"
track tensioners The tensioners could require adjustment. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
shoe width 20"
grouser height 58% worn Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
track link height 72% worn Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
pins & bushing wear (internal) Left-48% worn; Right-33% worn. Equipped with sealed track.
pins and bushings rotated Yes
pins & bushing wear (external) 71mm - Wear percentages for turned bushings are not available. Actual measurements are provided.
carrier rollers LF-120%; RF-73%; LR & RR-exceeds 120% worn. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
track rollers 30% worn Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
front idler height Less than 20% worn Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
sprockets Moderate to excessive wear Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
limited function check The undercarriage components functioned properly with wear as noted.
(7)


Specialty Equipment
Description Évaluation Détails  
blade condition Width-114 1/4". Equipped with a 6-way blade. There are nicks and dings throughout the metal work and a non-OEM spill guard has been added to the top of the blade. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
cutting edge condition The bolt on edges have been turned. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
ripper condition There are no ripper teeth with the unit. Cliquez ici pour découvrir des photos et lire des vidéos de cet article.  
(3)


Photos supplémentaires
(13)
 

Analyse d'échantillon d'huile
  engine transmission
date of analysis Mar 11, 2003 Mar 11, 2003
analysis by Spectro Spectro
Tin 5 PPM 2 PPM
Chromium 5.3 PPM 0.8 PPM
Copper 2 PPM 59 PPM
Nickel 0.8 PPM 0.1 PPM
Lead 6 PPM 7 PPM
Magnesium 260 PPM 14 PPM
Water 0 % 0 %
Silver 0 PPM 0 PPM
Iron 83 PPM 164 PPM
Silicon 18 PPM 10 PPM
Sodium 4 PPM 5 PPM
Aluminum 10 PPM 6 PPM
Glycol N N
Réclamations :
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.