|
|
34 Résultats trouvés pour "Construction"; "Asphalte/Dallage/Béton"
Veuillez patienter...
L'assurance IronClad
Nous ne cachons pas les bosses et nous n'embellissons rien. Nous
vous montrons la crasse et nous respectons notre parole 
Le symbole d'assurance IronClad® d'IronPlanet vous permet de vérifier que
l'un de nos inspecteurs a personnellement vu l'article et conduit une inspection
visuelle des éléments clés, pris des photographies, pris des mesures concernant
l'usure et, lorsque c'est approprié, effectué un échantillonnage des fluides/de
l'huile pour une analyse en laboratoire.
Les résultats de chaque inspection vous sont présentés gratuitement pour que
vous puissiez les examiner avant d'enchérir sur l'équipement. Nous vous
garantissons que ce rapport d'inspection est une représentation juste de
l'équipement dans sa condition véritable.
Achetez en toute confiance avec les enchères IronPlanet. Avec le sceau
d'assurance IronClad, vous pouvez être sûr que ce que vous voyez dans le rapport
d'inspection est ce que vous obtenez lorsque vous recevez l'équipement.
Restrictions
En utilisant les articles par catégorie de produits, y compris toutes les
photos, de notre rapport d'inspection comme base de comparaison, l'acheteur a un
jour ouvrable après réception de l'équipement pour rapporter à IronPlanet toute
réclamation portant sur une différence notable entre la condition de
l'équipement reçu et celle qui est décrite dans le rapport d'inspection, lorsque
l'assurance IronClad s'applique. Au cas où une réclamation est déposée
conformément aux termes et conditions (voir la section VI des Termes et
conditions d'IronPlanet), et si cette différence est validée par le biais du
processus de résolution des réclamations d'IronPlanet, IronPlanet peut soit
choisir de rembourser le prix d'achat plus les coûts de transport à l'acheteur,
ou de régler cette réclamation de toute autre manière mutuellement bénéfique
pour l'acheteur.
Veuillez noter : Toutes les réclamations doivent être envoyées avant la
possession implicite de l'équipement, conformément à la section V des Termes et
conditions d'IronPlanet, et font l'objet d'une franchise de 500 USD.
| Trier par :
Année | Constructeur | Modèle | Type
|
|
|
Compteur
|
Assurance IronClad
|
Enchère actuelle
|
Fin de l'enchère
|
|
|
|
Bros LSPRM-8 Soil Stabilizer
Open operator station, Detroit 8V-92 engine, 2WD, 8' rotor. The engine starts and runs, the drivetrain engages forward and reverse, the rotor spins and the hydraulic system is operational.
|
OR
|
|
2938
|
|
US 3 000 $
|
4 jours
22 heures
|
|
|
|
Caterpillar AP-800 Paver
Open operator station, Perkins diesel engine, hydrostatic drive, 16.00-24 tires, 10' screed extendable to 14'
|
UT
|
|
2857
|
|
US 5 000 $
|
4 jours
22 heures
|
|
|
|
Caterpillar AP-800 Paver
Dual operator stations, Perkins 4cyl. diesel engine, hydrostatic, 120" screed width, 210" screed width extended, 16-24TG tires
|
UT
|
|
7251
|
|
US 10 000 $
|
4 jours
22 heures
|
|
|
|
Barber-Greene DM60 Portable Drum Mix Plant
Portable Drum Mix Plant: 7'x30' portable drum mixer, 5-bin portable cold feed system, 30" transfer conveyor w/ weigh bridge & screen, portable baghouse, 100-ton portable asphalt silo, 30,000 gallon portable asphalt tank/CEI hot oil heater, portable control house, 20' parts & tools storage van trailer, ducting, walkway, ladders, cages.
|
CO
|
|
---
|
|
US 150 000 $
|
6 jours
21 heures
|
|
|
|
2008 MTW Portable 350 Barrel Cement Silo
350 barrel capacity, equipped with a 10 Inch Roto-Lock Feeder. See Specifications link below for additional information.
|
CO
|
|
---
|
|
US 15 000 $
|
7 jours
18 heures
|
|
|
|
2001 Gomaco Commander 3 Curb & Gutter Machine w/4 Molds
Open operator station, Cummins 6BT diesel engine, 12" track shoes, 2 vibrators, 4 additional curb molds included
|
IN
|
|
3904
|
|
US 40 000 $
|
9 jours
19 heures
|
|
|
|
1997 Blaw-Knox PF5510 Paver
Open operator station, 6 cylinder diesel engine, hydrostatic drive, 18" track belts, 10' (16' extended) screed width, electric heated screed
|
MS
|
|
189
|
|
US 8 000 $
|
9 jours
20 heures
|
|
|
|
Roadtec RX-60 Cold Planer
Open operator station, Cummins 18.7L engine, hydrostatic drive, 16" track shoes, discharge conveyor
|
UT
|
|
2495
|
|
US 30 000 $
|
10 jours
2 heures
|
|
|
|
Unused 2008 Ingersoll-Rand WS20200HHE Walk Behind - Concrete Saw
Walk-behind Saw, Hydrostatic, 20 HP Honda Gas, Saw blade not included ~ No warranty
|
FL
|
|
---
|
|
US 2 000 $
|
4 déc.
|
|
|
|
Unused 2008 Ingersoll-Rand WS20200HHE Walk Behind - Concrete Saw
Walk-behind Saw, Hydrostatic, 20 HP Honda Gas, Saw blade not included ~ No warranty
|
FL
|
|
---
|
|
US 2 000 $
|
4 déc.
|
|
|
|
2007 Miller MC650 Curbilder Commercial Curb Machine
Open operator controls, Honda 13hp gas engine, receiving hopper, 6" cast auger, right or left-hand extrusion. The engine started and ran. The auger drive system engaged. The main components appear to be in place and operational. Seller Comment: Will extrude either concrete or asphalt.
|
FL
|
|
---
|
|
US 900 $
|
4 déc.
|
|
|
|
2006 Right Manufacturing 2DH-4XCL Portable Concrete Batch Plant
Loader feed hopper with load cells and Rice Lake weigh system, hydraulic swivel/ tilt mixing drum, gas powered 1" water pump, on-board water supply tank, Fill-Rite water meter, Honda gas powered hydraulic drive source, tri-axle carrier
|
UT
|
|
---
|
|
US 12 000 $
|
4 déc.
|
|
|
|
2005 Cimline 110 DMR Magma Hot Patch Joint Sealer
Portable hot patch joint sealer, single axle trailer, Isuzu 3CB1-C 3 cylinder diesel, new heated hose system, 110 gallon capacity, computerized control heat system, pintle hitch, ST235/80R16 tires. The engine started and ran. The main components appear to be in place, but were not operationally checked.
|
MO
|
|
258
|
|
US 9 000 $
|
4 déc.
|
|
|
|
2005 Lee Boy L1000 T Paver
Open operator station, Hatz 2L$1C163P engine, hydrostatic, 96" screed width, 160" screed width extended, 13 1/2" track belts
|
FL
|
|
245
|
|
US 12 000 $
|
4 déc.
|
|
|
|
2005 Lee Boy L150 Tack Distributor
|
NC
|
|
---
|
---
|
À déterminer
|
4 déc.
|
|
|
|
2004 Caterpillar AP-1055B Paver
Open operator station, Cat 3116 engine, hydrostatic, 120" screed width, 240" extended screed width, 18" track belts
|
MA
|
|
---
|
|
US 60 000 $
|
4 déc.
|
|
|
|
1999 Gomaco GT3600 Curb & Gutter Machine
Open operator station, Cummins 4 cylinder engine, hydrostatic drive, 12" track shoes, water tank, 40" cutting width, 24" conveyor belts
|
PA
|
|
4677
|
|
US 12 000 $
|
4 déc.
|
|
|
|
1998 Allen TRTP96 Concrete Finisher
Open operator station, Kubota 4-cyl diesel engine, hydrostatic drive, 25' & 30' tubes, water system. The engine started and ran. The drivetrain engaged in forward and reverse. The main components appear to be in place.
|
NY
|
|
---
|
---
|
À déterminer
|
4 déc.
|
|
|
|
1996 Ingersoll-Rand DD90 Asphalt Roller
|
OK
|
|
---
|
---
|
À déterminer
|
4 déc.
|
|
|
|
1984 International S1654 Asphalt Distributor Truck
Conventional cab w/ heater, International B155 (6.9L) diesel engine, 5-spd manual transmission, 2-spd rear axle, air brakes, 9.00-20 tires, Etnyre distributor body model BT-HS, 1065 gallon capacity, hydraulically-driven pump, propane fired burners, folding spray bar. The engine started and ran. The drivetrain engaged in forward and reverse. The PTO engages but the driveshaft and hydraulic pump do not turn (stall the engine). The main components appear to be in place, but the distributor body could not be operationally checked.
|
FL
|
|
70127
|
|
US 3 500 $
|
4 déc.
|
|
|
|
CMI Tube Finisher
Open operator station, Ford 172-CID diesel engine, hydrostatic drive, 12-16.5 LT tires. The engine does not run. The drivetrain and hydraulic system could not be checked. This machine is not complete or operational. IronPlanet cannot generate a NAFTA Certificate for this unit. Buyers from Mexico and Canada should check with their export agent to determine if any additional fees apply.
|
CA
|
|
---
|
|
US 400 $
|
4 déc.
|
|
|
|
Custom Built Windrow Elevator
Open control area, Deutz 4-cylinder diesel engine, hydraulically operated elevator, 6.00-9 & 7.50-15 tires. The engine started several times but would not run long enough for an operational check. The hydraulic system could not be checked. The main components appear to be in place, but this machine is not fully operational. Please see Repair History link below for additional information.
|
CA
|
|
5797
|
|
US 250 $
|
4 déc.
|
|
|
|
Windrow Elevator
Open control area, Deutz 4-cylinder diesel engine, hydraulically operated elevator, 7.50-15 tires, tow bar w/ pin hitch. The engine started and ran. The hydraulic systen responded to the controls. There are weld repairs throughout the machine. The old hour meter is unreadable and the new hour meter reads 944hrs. The main components appear to be in place and operational. ***See Repair History link below for additional information***IronPlanet cannot generate a NAFTA Certificate for this unit. Buyers from Mexico and Canada should check with their export agent to determine if any additional fees apply.
|
CA
|
|
---
|
|
US 250 $
|
4 déc.
|
|
|
|
Gomaco 8500B Crawler Trimmer
Open operators station, Detroit 7063-7000 engine, hydrostatic drive, 30" X 30' rear rotating discharge conveyor, 14' cutting head, electronic grade control
|
MO
|
|
---
|
|
US 11 000 $
|
4 déc.
|
|
|
|
Asphalt Windrow Elevator
Open control area, MWM D327-4 diesel engine, 60" elevator flights, 7.50-15 tires, tow bar. The engine started and ran. The main components appear to be in place and operational. ~ Please click on Repair History link below for additional information. This item must be removed from Seller’s location prior to 12/18/2009. Failure to remove the item in that timeframe will result in the buyer being liable for a removal fee plus $50/day storage.
|
CA
|
|
---
|
|
US 400 $
|
4 déc.
|
Comparer
Voir les rapports d'inspection côte-à-côte
Articles par page:
|
+1 888-433-5426
